Electrostatics Ques 138

  1. Two parallel plate capacitors $A$ and $B$ have the same separation $d=8.85 \times 10^{-4} \mathrm{~m}$ between the plates. The plate areas of $A$ and $B$ are $0.04 \mathrm{~m}^{2}$ and $0.02 \mathrm{~m}^{2}$ respectively. A slab of dielectric constant (relative permittivity) $K=9$ has dimensions such that it can exactly fill the space between the plates of capacitor $B$.

(1993, 7M)

(i)

(ii)

(iii)

(a) The dielectric slab is placed inside $A$ as shown in figure (i) $A$ is then charged to a potential difference of $110 \mathrm{~V}$. Calculate the capacitance of $A$ and the energy stored in it.

(b) The battery is disconnected and then the dielectric slab is removed from $A$. Find the work done by the external agency in removing the slab from $A$.

(c) The same dielectric slab is now placed inside $B$, filling it completely. The two capacitors $A$ and $B$ are then connected as shown in figure (iii). Calculate the energy stored in the system.

Show Answer

Answer:

Correct Answer: 138.(a) $C_A=2 \times 10^{-9} \mathrm{~F}, U_A=1.21 \times 10^{-5} \mathrm{~J}$

(b) $W=4.84 \times 10^{-5} \mathrm{~J}$

(c) $U=1.1 \times 10^{-5} \mathrm{~J}$

Solution:

Formula:

Capacitor with Dielectric:

  1. (a) Capacitor $A$ is a combination of two capacitors $C_{K}$ and $C_{O}$ in parallel. Hence,

$$ C_{A}=C_{K}+C_{O}=\frac{K \varepsilon_{0} A}{d}+\frac{\varepsilon_{0} A}{d}=(K+1) \frac{\varepsilon_{0} A}{d} $$

Here, $A=0.02 \mathrm{~m}^{2}$. Substituting the values, we have

$$ \begin{aligned} & C_{A}=(9+1) \frac{8.85 \times 10^{-12}(0.02)}{\left(8.85 \times 10^{-4}\right)} \\ & C_{A}=2.0 \times 10^{-9} \mathrm{~F} \end{aligned} $$

Energy stored in capacitor $A$, when connected with a $110 \mathrm{~V}$ battery is

$$ \begin{aligned} & U_{A}=\frac{1}{2} C_{A} V^{2}=\frac{1}{2}\left(2 \times 10^{-9}\right)(110)^{2} \\ & U_{A}=1.21 \times 10^{-5} \mathrm{~J} \end{aligned} $$

(b) Charge stored in the capacitor

$$ q_{A}=C_{A} V=\left(2.0 \times 10^{-9}\right)(110) \Rightarrow q_{A}=2.2 \times 10^{-7} \mathrm{C} $$

Now, this charge remains constant even after battery is disconnected. But when the slab is removed, capacitance of $A$ will get reduced. Let it be $C_{A}^{\prime}$

$$ \begin{aligned} C_{A}^{\prime}=\frac{\varepsilon_{0}(2 A)}{d} & =\frac{\left(8.85 \times 10^{-12}\right)(0.04)}{8.85 \times 10^{-4}} \\ C_{A}^{\prime} & =0.4 \times 10^{-9} \mathrm{~F} \end{aligned} $$

Energy stored in this case would be

$$ \begin{aligned} U_{A}^{\prime} & =\frac{1}{2} \frac{\left(q_{A}\right)^{2}}{C_{A}^{\prime}}=\frac{1}{2} \frac{\left(2.2 \times 10^{-7}\right)^{2}}{\left(0.4 \times 10^{-9}\right)} \\ U_{A}^{\prime} & =6.05 \times 10^{-5} \mathrm{~J}>U_{A} \end{aligned} $$

Therefore, work done to remove the slab would be

$$ \begin{array}{rlrl} & W=U_{A}^{\prime} \quad-U_{A}=(6.05-1.21) \times 10^{-5} \mathrm{~J} \\ \text { or } & W & =4.84 \times 10^{-5} \mathrm{~J} \end{array} $$

(c) Capacity of $B$ when filled with dielectric is

$$ \begin{aligned} & C_{B}=\frac{K \varepsilon_{0} A}{d}=\frac{(9)\left(8.85 \times 10^{-12}\right)(0.02)}{\left(8.85 \times 10^{-4}\right)} \\ & C_{B}=1.8 \times 10^{-9} \mathrm{~F} \end{aligned} $$

These two capacitors are in parallel. Therefore, net capacitance of the system is

$$ \begin{aligned} & C=C_{A}^{\prime}+C_{B}=(0.4+1.8) \times 10^{-9} \mathrm{~F} \\ & C=2.2 \times 10^{-9} \mathrm{~F} \end{aligned} $$

Charge stored in the system is $q=q_{A}=2.2 \times 10^{-7} \mathrm{C}$

Therefore, energy stored, $U=\frac{1}{2} \frac{q^{2}}{C}$

$$ U=\frac{1}{2} \frac{\left(2.2 \times 10^{-7}\right)^{2}}{\left(2.2 \times 10^{-9}\right)} \quad \text { or } \quad U=1.1 \times 10^{-5} \mathrm{~J} $$



Table of Contents

sathee Ask SATHEE

Welcome to SATHEE !
Select from 'Menu' to explore our services, or ask SATHEE to get started. Let's embark on this journey of growth together! 🌐📚🚀🎓

I'm relatively new and can sometimes make mistakes.
If you notice any error, such as an incorrect solution, please use the thumbs down icon to aid my learning.
To begin your journey now, click on

Please select your preferred language
कृपया अपनी पसंदीदा भाषा चुनें